News Update :


Different Types Of Bricklaying Tools

Thursday, January 9, 2014

Bricklaying tools and equipment are used for various aspects of masonry work. The bricklayer tools are supposed to provide comfort grips, a great performance and have a long life spans. There is a wide range of bricklaying tools and bricklaying equipment and they can be grouped in a few basic categories, such as hammers, joint tools, trowels and string lines. In those categories all the bricklaying tools can belong: trowels, hawks, ladders, saws, spirit levels, cement mixers, stirrer drills, brick bolsters, groovers, edgers and all the rest. Whether for large or small construction project, bricklayer tools and equipment are suitable. Of all the tools, here you can read a few sentences about the most used tools in the masonry works.

Brick Trowel – The brick trowel is the largest tool of its family and it is used to pick up and spread mortar on bricks. The usual brick trowels are about 30 centimeters in length and have two long edges, either straight or with a slight curve.

Brick Hammer – The brick hammer has a specific design and it is meant for dressing bricks and other masonry materials. This hammer in shape of chisel can be used for chipping away sections of masonry.

Line Blocks – The masons need to position their guide lines and that is best achieved with the help of these L-shaped blocks, usually made of plastic or wood. The line blocks have a continuous slot at one end which holds the string line in place. The other end of the line block lips around the end of the wall.

Rubber Mallet – Rubber mallet is a hammer made of rubber and it is used to knock slabs, blocks or other heavy masonry materials. The rubber mallet causes little or no damage at all to the surface, even if a hard impact is applied.

Brick Jointer – They are a key component of any kind of masonry work, not only because they are integral to the structure of the wall, but brick jointers are also a part of the design. Many consider that jointers are only used for new pointing, but different thicknesses allow different joint depths.

Line Pins And String Line – A string line is a very important bricklaying tool as it enables the bricks to be leveled straight and level. They are help in place with line pins, steel pins that are pushed into drying mortar joints at the opposite ends of the wall. Then, the string is tied between the line pins and forms a guide line.
Share this Article on :

No comments:

Post a Comment